UpLULA™

Universal Pistol Magazine Loader

The UpLULA™ loader is a military-quality universal pistol magazine loader for loading all*  9mm Luger up to .45ACP rounds and mags,

single and double stack, of all manufacturers.

(Two US and international patents pending - for the loader and for the magazine aligner within.)

See maglula's official movie clip above.

1st unofficial clip.

2nd unofficial clip.

With the UpLULA™ loader you can load hundreds of rounds, painlessly !

Features:

Benefits:

-  1/3 the time loading mags.

- No more pain !

- Protects your fingers and mags.

- Load hundreds of rounds, painlessly.

- Dealers: Supply your customers with a problem solver; something they really need and will appreciate.

- Manufacturers: Add more value to your pistol kit.

- One SKU.

 

Does NOT load properly:

Glock 6rd .45 SS (Single Stack) (Beak will not come out of mag.)

Glock .45 G.A.P. DS (Double Stack) (Beak will not come out of mag.)

S&W 7rd 9mm SS (Beak too wide, does not enter between lips)

Please oil metal parts (steel beak, springs and pins) against corrosion.

Reviews:

Customer Product Reviews  (from Midway web site.) Maglula UPLULA Universal Pistol Magazine Loader   Paul Kovba of Waterford Works, NJ   Rating: Date Posted: 1/31/2007 Review: I acquired this UPLULA at the 2007 ShotShow and was very impressed with its design. I have yet to find a magazine that will not work. I will be carrying this item in my store. Two thumbs up on this one!!       Mike A of Wayne, NJ   Rating: Date Posted: 2/16/2007 Review: I just got my UpLULA in today and tried it out on some mags. It worked flawless on my Wilson Combat mags, ACT 1911 mags, Browning HP and HK USP 45 mags. It is made of quality plastic and seems it will be very durable. I really like how it is designed. The crew at Maglula did a great job with this loader.       Dennis Monckton of Sicklerville, NJ   Rating: Date Posted: 4/21/2007 Review: Amazing, only need this loader in my range bag. Works great! Highly suggested.       Bruce Layne of Lexington, KY   Rating: Date Posted: 4/24/2007 Review: I loaded 10mm Glock magazines, 9mm Glock magazines and the tiny single stack 6 round Kahr magazines and it worked very well, The operation is a bit different. Most mag loaders push down on the back of the top round in the magazine to make room for the round that's being loaded. The new round is started but then runs into the tab that's depressing the round below it, so the new round is only half loaded. The typical mag loader is then raised and the started round is then pushed all the way back against the friction caused by the round riding on the underside of the magazine feed lips. The Maglula has a flat finger that pushes in and down to depress the top round in the magazine, resulting in a shelf where the next round drops in all the way, without friction. The finger then pulls out the front and raises up above the newly loaded round. Mag loading is faster than traditional mag loaders. The universal aspect is clever. The mag is essentially wedged in a V-shaped notch to center it under the loader. I was surprised it worked on the tiny single stack magazine, and that feature alone makes this worth buying. The single stack mag was a little tricky. The Maglula has enough subtle complexity to have a little bit of a learning curve, but even the initial use was better than loading manually. On more common magazines such as the Glock double stack mags, the learning curve was almost nonexistent. The Maglula is faster and easier than the inexpensive Glock mag loaders or the HKS lever activated mag loader. The design of the Maglula doesn't seem to have any leverage, but it seemed to require less force than the HKS lever actuated mag loader, probably because the Maglula is so ergonamic, and it presses straight down on the rounds instead of pushing down on only the back of the rounds like most other mag loaders. The Maglula design and overall quality are excellent. It'd be worth the price if it was specific to one magazine, but the ability to load almost all pistol magazines makes this a best buy. It's particularly handy for loading high capacity magazines like the Glock 33 round 9mm mags. Several of us tried the Maglula and the only magazine that it wouldn't load was a Sten high capacity 9mm magazine, which was a bit of an oddball. It was a bit too fat to fit in the mag loader. But it worked well with all common pistol magazines.       Jacob M of Ypsilanti, MI   Rating: Date Posted: 4/30/2007 Review: Great product. I use this on my metal M11/9 mags. These Lula folks are pretty bright.       m s of Wichita, KS   Rating: Date Posted: 5/4/2007 Review: Just received it today and tried it out on my 5 M&P 9 mags. All I can say is outstanding!!! This was the first mag loader I've used, and I can't say enough good about it. Very easy to operate and lightning quick to load a mag. All the positive reviews on this loader are true. Outstanding job Maglula!!!!       Dan Kring of Hayward, CA   Rating: Date Posted: 5/17/2007 Review: Best pistol mag loader that I have used compared to factory Springfield XD and Ruger P91. Easy to use, loads quick.       B. Wit of Buffalo grove, IL   Rating: Date Posted: 5/28/2007 Review: I rate this 10 stars! It is absolutely the best, easiest pistol mag loader anywhere. Fast, works great and works with most mags. Loads my stiff STI 20 round .40 S&W all the way. BUY IT !!!!!       Steve P of St. Louis, MO   Rating: Date Posted: 6/8/2007 Review: Great product! Loads my Glock 19 double stack (even the last round) and my Hi-Point single stack magazines with ease. No more sore thumbs, just drop the next round in place.       Tom Bailey of Vista, CA   Rating: Date Posted: 7/2/2007 Review: 5/9/07 Must be something I don't understand here...I'm unsuccessfully trying to load G38 (.45GAP) mags. After I put the round in, case-first, per the directions, I try to simultaneously raise the Uplula and open the press (step 5). But the mag spring pressure clamps the beak so that I have to hold the mag down with my other hand to get the press to release and get ready to load another round. This happens with every round...my Glock mag loader is faster and easier than this! Help! 7/2/07 I posted a previous review that said I couldn't get the UPLULA to function properly with .45GAP mags. After emailing Guy Tal at Maglula, I learned that the high front wall of the GAP magazine locks the beak in under pressure. This problem, along with some other mags that don't load properly, is discussed on the UPLULA page of the Maglula web site. I've loaded several other caliber mags with this same UPLULA and it works fine.       N Rodriguez of Salt lake city, UT   Rating: Date Posted: 7/9/2007 Review: Once I figured it out. "took a couple minutes". This thing is amazing and only wish I had invented it. I am only using it for my M&P 40 and the last round goes into the mag like the first. Very fast! The 4 month back order here at MW was well worth the wait,       George Skrivanek of San Jose, CA   Rating: Date Posted: 7/21/2007 Review: A great tool It handled Glock, XD and 1911 magazines without a hitch. You can put away all of your different mag-loaders, this one does them all!       John Owens of Shawnee, OK   Rating: Date Posted: 7/25/2007 Review: I recently got the UPLULA loader, as with the Lula loader it's an ingenious design, easy to use, and the big thing is that it's universal, so instead of taking 3 or 4 different magazine loaders with me to the range, now I only need one!       John Krizan of Anaconda, MT   Rating: Date Posted: 8/9/2007 Review: I now own 3 magazine loaders and this is the best of all. I primarily bought this for my Polish P64 which uses 9x18 Makarov ammo. The clips are nearly impossible to load, but with the Uplula they are a snap. Highly recommended!!!!!       Steve Schreiner of Maricopa, AZ   Rating: Date Posted: 9/24/2007 Review: This is far and away the best magazine loader I have ever used. It took about three minutes to get used to the sequence of operations. From then on, it is a pleasure to load magazines. Since the top cartridge does not apply upward force on the magazine lips, the life expectancy of the magazine is greatly extended. This is a winner!       John Strahl of Midland, MI   Rating: Date Posted: 11/17/2007 Review: 5 Stars isn't enough for this amazing and ingenious little device. It makes the tedious chore of loading pistol mags enjoyable. It doesn't matter if they are Glock, SIG, H&K, Ruger or any other make, single stack or double stack, 9mm, 40, 10mm, 45 or whatever, the UpLula handles them all. It takes a learning curve of about 30 seconds to master, and after that loading mags to their capacity is a snap. I wish I had heard of these long ago when I was shooting more. For the price, you can NOT go wrong.       John Holdsworth of Cornville, AZ   Rating: Date Posted: 12/3/2007 Review: Absolutely ingenious. It will load just about any pistol mag except .22 and, perhaps, .25. Fast, sturdy, easy to use, no sore thumb. I just ordered a second one to keep in my range bag.       David Edwards of Little Rock, AR   Rating: Date Posted: 12/24/2007 Review: This product gets 5 stars from me. Unbelievable, it appears that the same minds that were responsible for the wonderful LULA rifle magazine loader/unloader have created the equivalent for pistol magazines. In the same way as the LULA, this product presses the topmost round down into the magazine so that there is an open space into which the next round can be simply dropped into place. This product has worked on every magazine that I've tried it on, including 380acp, 40sw, 10mm, and 45acp - both single and double stack. As if all of this weren't enough, this loader can be squeezed closed and locked with a little tab for smaller size for storage. Wonderful product. It is easily worth twice what they are asking.       Ralph Mountjoy of Columbia, MO   Rating: Date Posted: 12/26/2007 Review: I got this product for my 9mm & 45 High Point Pistols. It's the best thing out there to load your magazines!!! Very easy to use and it's very fast!!       John Reuter of Old hickory, TN   Rating: Date Posted: 1/21/2008 Review: I bought this for my Ruger SR9, these mags are tough to load but this loader works fine. Plus side is, it works on all of my Glocks, a lot better than their own loaders. I will buy more for my buddie4s and to keep in each range bag.       Diana Le of Clovis, NM   Rating: Date Posted: 1/27/2008 Review: No question this magazine loader is the BEST pistol loader that I've come across. I can't believe that I even bothered with other brands when I could have simply purchased this one and saved myself the headache and thumb pain. I use this for my Glock 22, Glock 34, and Tanfoglio Elite Witness Match pistol (which initially was a pain to load). Glocks are easy to load anyways, but using this makes the process all the more sweeter. As for the Tanfoglio magazines, I purchased high capacity magazines that started to stiffen half way through loading...with this loader, everything is a piece of cake. I would recommend this to anyone!       OTIS W of MEDFORD, OR   Rating: Date Posted: 2/6/2008 Review: Wonderful product, couldn't be any easier to use. Can't recommend highly enough.       Richard Metlen of Simi valley, CA   Rating: Date Posted: 2/11/2008 Review: Finally, something that works as advertised. This is great. Load 380 to .45 no problem. Worth every penny and more.       John DeNeui of Sioux Falls, SD   Rating: Date Posted: 2/16/2008 Review: Just got my Maglula UPLULA Universal Pistol Magazine Loader. After that name it should be good!..And it is!..Better than I could have hoped for. Learning curve pretty flat. Loaded three S&W M&P 40s' in less time than it took to get the rounds out of the shell case (gonna work on that!).Thanks Midway & Maglula       Daniel Fleming of Beaverton, OR   Rating: Date Posted: 2/18/2008 Review: This is a great product. Worked without an issue on Glock 23 magazines.       David Webb of Eads, TN   Rating: Date Posted: 2/27/2008 Review: I watched the UPLULA movie clip link provided by Midway, and decided to order. Use isn't that intuitive, but once I got it figured out, I can easily see how they demonstrated a one round per second load rate. I especially like the fact that it removes all pressure/wear on the magazine feed lips while loading, and that length/width of magazine is not an issue for the device. Obviously, saves lots of wear on your thumb. Body is reinforced polymer, loading "beak" and spring is steel. Note warning from Manufacturer that this device "May not load few types of mags, and mags with less than 8.0mm between their lips". Manufacturer also states that this will load some Mags for .380 (or 9mm short). Product is made in Israel, is of very solid construction and can be highly recommended.       George Grayson of Mooresville, NC   Rating: Date Posted: 2/29/2008 Review: I always take a products claims with a grain of salt. The Maglula Loader is much better than I ever expected. It not only works as advertised but much better. I find it makes loading my Glock 21C.45 ACP magazines a breeze, even enjoyable. Buy it, you can't go wrong.       Gary Thompson of Modesto, CA   Rating: Date Posted: 3/1/2008 Review: The best loader I have used. Worked great with magazines for 1911 magazines and all Glock magazines except the Glock 36, but they are no trouble to load without the Maglula loader. Purchased three and will probably get a few more.       Christian Cafuir of Herndon, VA   Rating: Date Posted: 3/2/2008 Review: Works exactly as advertised. Easy to use and really helps cut down on reloading time.       Randy Wilkerson of St. Louis, MO   Rating: Date Posted: 4/1/2008 Review: NO MORE SORE THUMBS. This thing makes loading mags fun.       GORDON BENNETT of OZARK, AL   Rating: Date Posted: 4/2/2008 Review: I used the speedloader today on 9mm, 10mm, 40 s&w, and 45 ACP it works fine on all of them. Great tool for old hands.       Gary Cassida of Bloomington, MN   Rating: Date Posted: 4/11/2008 Review: I purchased a loader before Christmas. I've used in on two 9mm pistols, two 40cal S&W pistols, and a 45 ACP Ruger. It WORKS like a charm. It speeds up your reloading a mag a lot. It is a vast improvement over the other loaders I've bought or used. Great product and a good Midway price.       Robert Hogan of Fenton, MO   Rating: Date Posted: 4/14/2008 Review: This thing works great on my 9mm XD9 Tactical. It worked fine on my Ruger as well. This is worth EVERY penny!       Kevin Andrews of Tupelo, MS   Rating: Date Posted: 4/15/2008 Review: Loads my 9x18 Makarov and my 7.62x25 Tokarev. Truly one size fits all. No more sore fingers at the range.       Andrew Dalzell of Chagrin Falls, OH   Rating: Date Posted: 4/21/2008 Review: Best pistol mag loader ever. I used it on my .45 ACP 1911 mags and my CZ75 9mm mags. This thing is amazing. It works perfectly everytime. I don't need any other pistol mag loaders (except for my .22, Maglula is too narrow for rimfire mags just as they say it is.) You have got to get one of these.       Craig Hicks of Chapel hill, NC   Rating: Date Posted: 5/1/2008 Review: Excellent product, sure saves time and thumbs. It takes more time to pick up the cartridges than it does to load them with this.       Mike Evans of Nashville, TN   Rating: Date Posted: 5/3/2008 Review: Best shooting accessory I have ever purchased. Makes loading high cap mags easy, fast and without sore thumbs!!!       Eric K of Cassel, CA   Rating: Date Posted: 5/14/2008 Review: Great little product. Well made and works as advertised. Loads up my magazines a lot faster than other brands. However, it tends to stick when loading up a 45 GAP Glock magazine. But it still is a great product!!! I highly recommend it!       Mel Morganstein of Charlotte, NC   Rating: Date Posted: 5/20/2008 Review: The UPLULA is totally super. In fact, the buyer for the gun store/range that I regularly use, "Firepower", here in Charlotte, tested a number of speed loaders and he felt the UPLULA FAR superior to anything else on the market.       Frank Smith of Snowflake, AZ   Rating: Date Posted: 5/23/2008 Review: I just received my UPLULA and found its ease of use to be outstanding. This is far superior to the mag loader that came with my XD9-SC.       James Dunne of Lecanto, FL   Rating: Date Posted: 6/1/2008 Review: Just tried this on several types of mags, including my CZ 82. Worked great on all from 45 ACP to 9X18. Both single and double stack. Today was the first time I could put 12 rounds in those CZ 82 mags without hurting my 67 year old fingers. Will get a second one on my next order.       David Reitberger of Victoria, TX   Rating: Date Posted: 6/6/2008 Review: The UPLULA is the best aid to loading pistol magazines! I just received mine and my fingers are so happy to not be in pain from loading numerous high cap magazines. This loader also is a time saver as magazines can be loaded in record time affording more time to fire the rounds off.       Bob B of Glendale, AZ   Rating: